|
|
GENERAL EQUIPMENT INC.
8724 Sunset Drive #191● Miami FL 33173 · USA
|
|
|
GENERAL EQUIPMENT INC.
8724 Sunset Drive #191● Miami FL 33173 · USA
|
TUNNEL DRILLING
|
TYPE: |
Drilling |
|
DESCRIPTION: |
Complete Tunnel Drilling Plant |
|
PRICE: |
Upon Request |
|
PACKING: |
As is, Where is |
complete tunnel drilling plant
Subject unsold or market
withdrawal
|
1 unit Complete tunnel drilling plant - Diameter up to 4.5 meter including tubing-siding bridge and gunite slider Lagging tunnel (optional)
Type:
ATLAS
Copco Jarva MK 12
YOB:
1990
/ 2005
Manufacturer:
ATLAS / ROWA /
TAMROCK / MEYCO
Drilling unit:
Head diameter:
3.5 until 4.5 m
Length:
12.1 m
Head space:
0.5 until 1.5 m
Input power:
1.000 KW
Speed:
12.2 rpm
Torque:
705 KN
Max. feed:
635 to
stroke:
1.5 m
Motors:
4 x 250 KW
Drilling head:
ROBBINS
Centre
chisel:
4 x 12”
Calibre chisel:
27
x 16 ¼”
Maximum pressure for
hydraulics: 345 bar
Output discharge for rubble:
6 m³/h
Rear bed (dolly):
ROWA
Curve
radius
>300 m
Step 1:
anchor /build-in bow/scrim
Step 2:
anchor/gunite/probing drill
Venting:
blower
Supply track:
750 mm
Disposal track:
750
mm
Daily performance normal
(18h): 25 m
Daily performance high (18h):
40 m
Max propulsive force per hour:
4.5 m
Belts:
Transfer belt:
200 to/h
Length:
4 m
Width:
650 mm
Power:
5.5 KW
Weight:
2.5 to
Dolly belt:
200 to/h
Length:
100 m
Width:
650 mm
Power:
18 KW
Speed:
2 m/sec
Weight:
11 to
Anchor slide:
Length:
12 m
Weight:
9 to
Anchor driller 1 left/right
side TAMROCK
Hammer:
HL 300
Cable controlling:
TA 342
Oiler:
KVL 10-1
Anchor driller 2 left/right
side: TAMROCK
Hammer:
HL 300
Cable controlling:
TA 342
Carriage:
KS 140H x 21
Cylinder
600 mm
Oiler:
KVL 10-1
Gunite slide:
Length:
12 m
Weight:
11 to
Gunite robot:
MEYCO ORUGA
Spraying area in length:
9 m
Spraying area in wide:
240 degree
Weight:
5 to
Power:
15 KW
Carrying vehicles:
2
CATERPILLAR
TUEBBING siding / built-in
bridge:
Length:
12 m
Weight:
25 to
Guide way length:
17 m
Crane capacity:
2 x
1.6 to
Power:
6 KW
Suprema:
Length:
2.5 m
Width:
1.52 m
Height:
2 m
Delivery:
3-20 m³/h
Distance:
300 m
Height max:
100 m
Motors:
3 x 30 KW
Weight total:
2.2 to
Output diameter:
100 mm
Electric supply:
High voltage drum:
450 m
Operating voltage:
10 kV
Weight:
2.5 to
Transformer 1:
1250
kVA
10 kV down to 600 V
Transformer 2:
1000
kVA
10 kV down to 380 V
Transformer protect switcher:
120/180 A
Emergency lighting:
10 lamps for 1
h
Emergency generator:
10 kVA
Emergency container box
(survival box)
Individuals:
10
Weight:
2 to
Aeration:
extern from outside
First aid:
O2-bottles
Air compressor:
Screw type:
ATLAS G 75
Performance:
13.3 m³/min - 7.5 bar
Connect size:
G
2 ½”
Motor:
75 KW
Pressure:
7.5 bar
Spare package:
Main bearings
Planet gear
Motor 250 KW
Hydraulic motor
Filter package
Safety set
Bits and pieces
History of usage:
Works done in Norway 8070
meters
General revision at ATLAS
Works done in Italy: 1300
meters
General revision at Rothpelz
Lienhard Swiss
Works done at Switzerland 800
meters
General revision at Rothpelz
Lienhard Swiss
Works done at Saas Switzerland
1900 meters
Revision complete in 2005/2006 |
Specification and photos are not contractual and are subject to verification upon inspection
TAKE NOTICE!
PLEASE BE ADVISED THAT INFORMATION INCLUDED IS CONFIDENTIAL IN NATURE AND IS BASED ON PRE-EXISTING BUSINESS RELATIONSHIP WITH THE LEGAL OWNER OF PROPERTY DESCRIBED HEREIN (IF APPLICABLE). AS SUCH, UPON RECEIPT OF SAID INFORMATION THE RECEIVER ACKNOWLEDGES THAT ANY UNAUTHORIZED CONTACT WITH SAID LEGAL SELLER WILL BE CHARACTERIZED AS A BREACH OF CONFIDENTIALITY AND SAID AGREEMENT MAY BE ENFORCED UNDER EXISTING LAW OR IN EQUITY.
This paper was
prepared by General Equipment Inc.
The paper represents an offer of a partner of General Equipment Inc.
All rights are reserved by and for General Equipment Inc.
All
content and ideas of this paper are the property of General Equipment Inc.
